COMPANY HEADER
Request Information
Unit of Measure
Items
ISO 6164, Flat Face, ISO 6149, In-Line Flanges

JIS B 2291 210k SH, Flat Face, SAE (ORB), In-Line Flange

ISO 6164, Flat Face, ISO 6149, In-Line Flanges

JIS B 2291 210k SH, Flat Face, SAE (ORB), In-Line Flange

ISO 6164, Flat Face, ISO 6149, In-Line Flanges

JIS B 2291 210k SH, Flat Face, SAE (ORB), In-Line Flange

ISO 6164, Flat Face, ISO 6149, In-Line Flanges

JIS B 2291 210k SH, Flat Face, SAE (ORB), In-Line Flange

ISO 6164, Flat Face, ISO 6149, In-Line Flanges

JIS B 2291 210k SH, Flat Face, SAE (ORB), In-Line Flange
Carbon Steel Part Number N/A 1512-08-08M N/A 1512-12-12M N/A 1512-16-16M N/A 1512-20-20M N/A 1512-24-24M
304L Stainless Steel Part Number N/A 6512-08-08BM N/A 6512-12-12BM N/A 6512-16-16BM N/A 6512-20-20BM N/A 6512-24-24BM
316L Stainless Steel Part Number N/A 6512-08-08DM N/A 6512-12-12DM N/A 6512-16-16DM N/A 6512-20-20DM N/A 6512-24-24DM
Brands N/A Main
Series N/A JIS B 2291 210k SH
Flange Dash Size N/A -08 N/A -12 N/A -16 N/A -20 N/A -24
Flange Size N/A 15 mm1/2 in N/A 20 mm3/4 in N/A 25 mm1 in N/A 32 mm1-1/4 in N/A 40 mm1-1/2 in
Port Dash Size N/A -08 N/A -12 N/A -16 N/A -20 N/A -24
Pipe Size N/A 1/2 in N/A 3/4 in N/A 1 in N/A 1-1/4 in N/A 1-1/2 in
Industry Standards N/A International Organization for Standardization (ISO) 6162 Society of Automotive Engineers (SAE) J518
Face Type N/A Flat Face
Port Style N/A SAE J1926 (ORB) Threaded
Geometry N/A In-Line
Dimension A N/A 2.50 in N/A 2.75 in N/A 3.25 in N/A 3.50 in N/A 4.00 in
Dimension B N/A 1.25 in N/A 1.38 in N/A 1.62 in N/A 1.75 in N/A 2.00 in
Dimension C N/A 1.25 in N/A 1.50 in N/A 1.50 in N/A 1.50 in N/A 1.75 in
Dimension D N/A 40.000 in N/A 45.000 in N/A 53.000 in N/A 63.000 in N/A 70.000 in
Dimension E N/A 1.574 in N/A 1.772 in N/A 2.086 in N/A 2.480 in N/A 2.756 in
Dimension J N/A M10x1.5 N/A M10x1.5 N/A M12x1.75 N/A M12x1.75 N/A M16x2
Dimension F N/A 0.63 in N/A 0.75 in N/A 1.00 in N/A 1.25 in N/A 1.50 in
Thread Size K N/A 3/4-16 N/A 1-1/16-12 N/A 1-5/16-12 N/A 1-5/8-12 N/A 1-7/8-12
Note N/A The pressure rating of the assembly should not exceed the lower of the flange pad or the fitting. Check the fitting manufacturer for details.